سفارش تبلیغ
صبا ویژن
هرکه خدا دوستی را بر خودْ دوستی مقدّم بدارد، در برابر سختی و دشواری مردم، خداوند او را بسنده باشد .بنده ام پیروی ام کن تا تو را مانند خود گردانم . [.رسول خدا صلی الله علیه و آله]
 
پنج شنبه 95 آبان 20 , ساعت 6:33 صبح

 

برای دریافت پروژه اینجا کلیک کنید

مقاله Internal and External Protection of Gas Turbine Blades by Slurry Silicoaluminizing Process با word دارای 9 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Internal and External Protection of Gas Turbine Blades by Slurry Silicoaluminizing Process با word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Internal and External Protection of Gas Turbine Blades by Slurry Silicoaluminizing Process با word،به هیچ وجه بهم ریختگی وجود ندارد


بخشی از متن مقاله Internal and External Protection of Gas Turbine Blades by Slurry Silicoaluminizing Process با word :

سال انتشار: 1386

محل انتشار: دهمین کنگره ملی خوردگی ایران

تعداد صفحات: 9

چکیده:

External and internal surfaces of the blade airfoils are exposed to the gas turbine operating environment, which is both thermally and chemically hostile. Diffusion ahlminide coatings are particularly useful for providing environmental protection to components equipped with internal cooling passages because they are able to provide environmental protection without significantly reducing the cross-sections of the coolingpassages.In this study. slwry method was utilized to apply plain aluminide and Si-modifiedahlminide coatings onto external and internal surfaces of Ni-base super alloys of In738LC and GTD-l11. The thicknesses of applied coatings onto external and internal sample surfaceswere 70-90 um and 30-60 um, respectively. The microstructures ofthe coatings have been investigated using SEM. EDS, XRD and. TEM. The examinations showed that the Al-Si coating is an intermetallic nickel aJllminjde coating with asiliconenriched outer layer that contains silicide precipitates. The intermetallic phase was formed by an inward diffusion of aluminum. Based on the XRD results obtained. it was found that the Al-Si coatings with sufficient silicon promote the formation of some SiCh oxides in conjunction with AhO] and results in improving the oxidation resistance of ahlminide coatings.

 

 

برای دریافت پروژه اینجا کلیک کنید

لیست کل یادداشت های این وبلاگ